Видео

Thank you my brother in King Jesus.

Thank you. I replace the top work perfect but in my ge French doors has small fan in the left side i replace but don't work. Some help please thanks.

Sir! You are a steely eyed missile man, YES YOU ARE!

Do you only replace the one side?

Gonna look into picking up one of these for my family. My neighbors dog keeps messing up my driveway so this might do the trick. Thanks!

Awesome video that helped us to DIY - now praying that was the problem and we start to see the temperature go down!

I find your video easy to understand. My GE fridge is almost identical except for the controls. If I can find the model number could you please help me find the right part so I can try to fix it? I’m in Hartly, Delaware been putting it off for some time. Thank you.

this video helped me fix my frig 2 years ago and now it's helping me again, thanks a lot!!!!

Two years ago I followed your instructions and replaced the evaporator fan (thank you). The cooling problem was solved with a new fan but right after that I noticed ice started building under the vegetable drawers. Any ideas what to do about correcting it?

That's exactly our issue

I want to let you know I really appreciate you posting this video. It was a lifesaver for me. Our dryer has been out for almost a week and even though it’s under warranty through Speed Queen we still have yet to receive a call from the repairman to come take a look! With your video I was able to get an element that I bought off Amazon replaced in just a few minutes. Thank you so much!

Saved a few hundred dollars thanks to your video! My fridge was nearly the same but had a slightly different design than yours in the video. Mine had a button that you can press that changes the temp in the crisper and has a second smaller fan inside of a big styrofoam housing. I was worried when I found it that it might have been the cause of the problem. But after I swapped the larger center fan, by the next morning, the fridge was cold! My thanks to you!!!

Just got the fan but do you need to do the software update didn't come with modul

I ordered the fan for less than $20 from Amazon & followed your steps to replace it. The fridge was cool in no time. The other issue I was having is no water being dispensed. That has not resolved as of yet. Any thoughts?

I ordered the new part you said but I received part# WR 60X 10356, will this part work without the software update? Do you know?

Thank you!!!! This was very very helpful!!

Does the same apply for right hand drive e90s ? Obviously I would spray the other direction but is the blower motor always located on the passenger side ? Thanks

Thanks! No telling what the rental car company would've charged for this! Big help, this video.

Works on F25 X3 35i

I’m glad I found this video. I’m having the same issue so I hope this will solve it. I’ll let you know if this was the right fix! (Praying it is so I can do it myself. Can’t afford a repairman)

Very helpful video, thank you for posting. We had the fan replaced once already at a cost of $400 so I'm glad to give it a try on my own this time. You show the software (upgrade?) at the end and I'm just curious does this have to be ordered separate or will the fan come with that addition? There are a variety of choices when I look for the part and it makes me think that the more expensive ones will have that software? Any additional insight is greatly appreciated.

Thanks for the video. What if the evaporator fan works just fine? Top of fridge isn’t getting as cool, bottom deli drawer is freezing, water dispenser is freezing and won’t dispense. Do I need to replace the deli drawer fan? Or is it another issue?

Thank you man! Super helpful for a beginner like myself

Thank you. Found the switches in local store and installed them in less than 15 minutes.

I need to know what to do about my Aliance dryer has a d5 & 4 error code

6.5 years after you posted this video and it's still valuable to helping people! The steps aren't exactly the same on my GFD28GELCDS, but close enough for me to get the repair done myself for a fraction of the cost of a repair person. Hopefully commenting keeps this video up high in Google search results. I'll also add that all the nuts I had to remove were 1/4"; maybe that'll save someone a few steps back and forth to the toolbox.

So, it was indeed the fan…the old one had seized and my symptoms were identical to the one in your video. However, I didn’t get any cable for performing a software update. Is this essential?

Super helpful! I was able to change mine out today in about a half hour! Thanks for the great video!

Thank you for putting this together. Really helpful. Glad to know I don't have to get a software update.

😂😂 wrong info, water heating with heating element. There is only cold water going to inlet valve

When I changed my fan just like this, it did not come with a cord and update box, and it never worked any better than the original

Where are you guys buying the part? On Amazon they are more expensive.

Awesome! right to the point. Thank you so much.

Is this a good dryer? Thinking of buying a used one.

Thank you so much. Directions were spot on and saved us a lot of money. Total repair took 40 minutes from start to finish!

Besides running the hot water before starting the cycle, put the pod in the flatware caddy. It will dissolve partially in the pre-wash cycle and fully dissolve in the main wash. Your dishes will come out clean. Furthermore, you won't have that heavy perfume scent lingering on your dishes. Just try this once. But yes, always run the hot water faucet til ripping hot then immediately start the machine. Delay Cycle is not your best friend.

What's the part number? Passenger side?

Simple and easy to understand, thank you!

Glad I found this video. Any advice?? I purchased a GE Profile french door refrigerator in Feb 2023. In September, it started making an annoyingly loud buzzing sound. I've had GE replace the evaporator fan twice, under warranty. The same noise persists. You can hear the fan kick on and spin up to speed. The noise it makes has the sound/frequency of a big commercial wood chipper being used by someone down the street. It's hard to have a conversation at the kitchen table. When I bang on the plastic evaporator cover, the noise stops for a few seconds...then resumes. Anyone have an idea how this can be fixed? Do I need to add some damping material somewhere on the back panel of the fridge, tighten the condenser assembly, anything?!!! It's enough to cause me dump this unit and go with another brand. Sorry for the long-winded comment.

Idk i think you needed to mix the dye in, for as long as it sat that dye shouldve dispersed through the whole tank. Your method in theory should work but your execution was faulty. You can see around wihere water would possibly leak from was clear. Gotta mix the shit in with the gravy

Thanks!!!

Hi, thanks so much for the video. Our water bill has been $100-$200 more than normal for 4 months, and we thought it was our built-in sprinkler system, but we stopped using it and the bills still high. I did this test and one of our upstairs toilets had the dye in the bowl this morning after putting the drops in last night. This toilet had leaked before, but I'd hear the fill valve running all the time and and it stopped doing so when I replaced the flapper not that long ago. And while the bowl had die, most of the dye was still in the tank, and after turned the water off to that toilet, the tank was still full (with water and dye) hours later - the water level was not discernably less. The fill valve is old and probably needs replacement, but I don't see how that would put dye from the tank into the bowl? Perhaps is the gasket and not the flapper? But if so, why didn't I hear the fill valve running extra (before I turned the water off)? Is there anything else it could be? Thanks in advance for any help!

Thanks a bunch. Saved me $ and allowed me to DIY.

Thanks for the info, it will be an easier job than expected hopefully my local speed queen dear has one in stock.

Amazing.

How didn't you see the water in the yard

Great video! I’m going to give it a shot!

Do you have to unplug the refrigerator before replacing the fan?

Thank you for posting this @ljschuby99. Super helpful.

Wow! Why bother. Now that you have filled the panel full of holes and scratched the sht out of it, you still dont have windows?